Ways to Clean a Bunn Coffee Maker

Sharing is caring!

If Will you devote Your precious time to learning how to empty a Bunn coffee makerYou’ve chosen the right article to get the answer to your question. A lot of coffee lovers at times find it difficult to empty their coffee maker due to not having proper knowledge.
Some even end up making a loss to their machine by trying to empty it in the wrong way. Therefore, I’m going to share with you a step-by-step ultimate guide that will teach you the way of draining a Bunn coffee maker. Ensure, Go through the post till the end.

Why Should You Empty Your Bunn Coffee Maker?

bunn coffee maker

Note: This post may contain affiliate links, which means if you buy from my link I might make a small commission. This does not affect the price you pay. See the full affiliate disclosure here.

Before learning how to empty a Bunn coffee maker, it’s crucial for you to learn why you have to do it. The major reason for draining the Bunn coffee maker is to remove its bunk tank water from one place to another.
It’s important when you’re willing to shift your home or you’re going on a journey where you want your favorite coffee machine with you. Because most of us don’t like the taste of other coffee machines but the one that we’ve been using for quite a while now.

Alo Read Out: Best Ways To Reheat Starbucks Coffee

So, if the water remains inside of the machine while you’re traveling, then it will surely damage it and cause a lot of other issues as well. Therefore, Draining the water of the Bunn coffee maker is cardinal so that you don’t have to go through any serious trouble.

Methods To Empty A Bunn Coffee Maker

Let’s look at how to quickly and efficiently drain a Bunn Coffee Maker. I’m going to mention everything step by step so you can learn better. Ensure you follow the steps carefully.

1) Turn Off The Coffee Maker

turn off coffee maker

Turning off the coffee maker before starting the draining process is crucial. Why? Because, when there is water inside of it and it’s turned on, then it may create some sort of serious issue for not only the machine but you as well.
To do this, Just unplug the switch of the machine from the outlet and it’ll be turned off. Don’t just turn it off from its button, or else the outlets will still provide power to the machine. The switch must be unplugged from the outlet.

2) Cool The Hot Water

Cool the water

See if the water in the Bunn tank is hot. If it is, then cool it down first. You’ll need to pour cold water into the tank to cool it down. Open the cover and immediately pour the contents into the brewer.
You can flush out the hot water once the hot water in the brewer has cooled down. Close the cover of the coffee maker and place the craft on the warming plate.
The cool water will force the hot water inside the ship. This procedure must be repeated twice more or until the hot water tank is completely empty.

Also Read Out: How to Clean A Krups Coffee Maker

3) Empty The Coldwater From The Tank

In the third step, you have to empty the Coldwater from the Bunn coffee maker tank. First, rotate the brew funnel and spray head in an anticlockwise way to remove them. And then set them on the table.
And then, take your machine to the sink or somewhere else where cold water can be drained. Set the machine so that water starts to flow from the top lid and spray head tube.
Maintain this temperature in your brewer until all of the cold water has been drained from the spray head tube and top lid. The water from the Bunn coffee maker has now been drained.

4) Put Together All The Parts 

You must now assemble all of the maker’s pieces after draining the water from the Bunn market tank. It is critical that you take note of how the components appear and what goes into what as you remove them.
This is crucial for first-timers who are unfamiliar with the Bunn coffee maker. Continue by putting together the spray head. Return the spray head to its previous position. It must be inserted after twisting the brew funnel clockwise.
Take cautious not to harm any of the coffee machine’s components. If you encounter any resistance while attempting to reinstall the pieces, don’t force them in. Remove them and double-check your work.
That’s it, if you have any questions, you can ask me in the comment section down below.